Brother S-7250A “NEXIO” Premium
・Reduces needle breakage, puckering and materials slippage with DFF
・Elimination of oil stains due to the adaption of the sealed type oil pan.
・Productivity improvement management by utilizing loT
Single Needle Direct Drive Lock Stitcher with Electronic Feeding System and Thread Trimmer
Simple and easy-to-use standard lockstitch machine with selected functions
Reduces needle breakage, puckering and materials slippage with DFF
Elimination of oil stains due to adaption of sealed type oil pan
Productivity improvement management utilizing IoT
DigiFlex Feed Direct Electronic Feed Control:
DigiFlex Feed, which is world’s first equipped on S-7300A and highly evaluated in market, digitalizes feeding system and resolves various sewing troubles without adjustment work. Improvement in reduction of needle breakage and productivity. Simple select and smooth sewing without material slippage. Excellent sewing quality that’s easy to get proper thread tension in accordance with several materials
Needle Breakage Prevention with Brother Own 3 Functions:
Optimization of the fabric feed timing by changing feed motion of DFF. Fabric can be feed at an appropriate timing so that needle won’t break even during thick material sewing. Change from mechanical control to 2 stepping motor control by equipped DFF. Compared to conventional mechanical control, the stepping motor control makes the response of reverse sewing quicker and reduces the needle breakage. Equipped with needle prevent 3 breakage function while reverse sewing. Sensing needle position and controlling proper feed timing that prevent from unreasonable reverse sewing.
A Variety of Functions Realize Ease of Use and Ideal Sewing Quality:
Beautiful stitching without puckering. DFF realizes appropriate thread tightening in relation with the fabric and reduces puckering. Short remaining thread, (3mm) 5 doesn’t require after-cutting process. The new double action thread trimming mechanism cut’s the thread right under the needle hole, realizing the short remaining thread at minimum of 3mm.
